Steam Shower, Shower Cabin, 9005, Cubicle

Steam Showers, Shower Cabins, Whirlpool Baths, Bathroom Suites, Waterproof TV, Bathroom Furniture, Shower Towers, Shower Enclosures and Taps.

****JavaScript based drop down DHTML menu generated by NavStudio. (OpenCube Inc. - http://www.opencube.com)****

Home Page | Back to Steam Showers

Bathtek Steam Shower Cabin

The Lauderdale has a huge 25cm monsoon rain top shower, hand shower and riser, back jets and of course powerful 3kw steam generator. The unit has roof light, and interior and exterior LED lights too. The back inside walls of the cabin are darkened mirror glass and create a truly luxury feel against the crisp white base and metal frame. The side walls and doors are clear glass. The Lauderdale can also be used as a bath and even has a headrest ready for when you do!

CLICK TO VIEW A LARGER IMAGE
Lauderdale Steam Room

Click image for larger version

Size: 1600mm x 850mm x 2250mm

Price £1299.99
Delivery £129.99 (see exceptions)

Remote Control
Electronic steam time & temperature control
Thermostatic Shower Valve
25cm Tropical Monsoon Top Shower
6 Hydro massage body jets
Multi function hand shower
Foot massage attachment
Built-in FM radio with cd/mp3 input
Pop up waste
Extractor Fan
Toiletries Shelf
Low voltage ceiling lighting
LED back lighting
Built in seat
Requires between 1-3 bar of water pressure.
Ozone Sterilization (o3)
3kw Steam generator

Learn about the benefits of Hydrotherapy


Click to view larger product feature images.

Large steam rooms allow the occupant to sit or stand at a comfortable distance from the steam outlet whilst enjoying the steam facilities. In order to offer the same steam facilities but within a smaller shower cabin footprint the location of the steam outlet pod may be close to the occupant. Care must be taken when using the steam function to avoid scalding. Children should NOT use the steam within the product unless under strict adult supervision.

Package sizes:
Carton 1: TBC
Carton 2: TBC
Carton 3: TBC
Carton 4: TBC

Measurements are a guide only.
Package dimensions may change without notification.

Click here for Schematic

Your Delivery:
Your order will be supplied on a Pallet and arrive on a Tail-lift lorry. The delivery will be taken to your door or as close as is possible within access restrictions (narrow gates etc). You are required to inform us of any access restrictions that may affect deliveries to your delivery location, which would require a smaller delivery vehicle. You are asked to check the goods upon arrival and inform us of any damage within 24 hours.

Installation Notes:
Electrical: This steam shower cabin requires 1 x 13amp electrical supply. It comes with a plug and RCD fitted, however we recommend you remove the plug and have the cabin installed to a fused spur. If you have an RCD fitted within your mains board you may also remove the RCD fitted to the unit.
Water: The cabin requires 1 x hot and 1 x cold water supply. The household water pipes should be fed to a point approximately 1 metre off the floor in the corner where the cabin is to be fitted. Balanced water pressure is required, between 1-3 bar. If using a gravity fed system we recommend you use a pump, to provide the required water pressures. Bathtek do not supply pumps. The steam cabin is a freestanding unit and as such we would recommend your fitter does not fit the unit into locations that mean the cabin cannot be moved away from the wall if needed. The couplings on the cabin to connect to your water supply are standard 15mm compression fittings.
Some of our products arrive in large boxes, please ensure that you have enough room to manoeuvre the boxes and their contents to the installation location. Please also consider the space required to construct the shower cabin needs to be sufficient to enable you to move around the whole unit during its assembly, before sliding into position.

Please also read our helpful FAQ section.