Home Page | Back to Steam Showers
Bathtek Compact Steam Shower Cabin
We have often been asked if we are able to supply one of our steam shower cabins in the slightly smaller 800 x 800mm option. We are now really pleased to be able to offer the Davenport 800. With all the great features of larger and more expensive steam showers in the Bathtek range but ideal for limited space especially en-suites. Features include: Monsoon rain shower, foot massager, hand shower and back jets. The Davenport 800 has a roof light, and interior LED lights too, FM Radio with MP3 input and electronic control panel. The back inside walls of the cabin are darkened mirrored glass and clear front glass, with a glass shelf and soap dispenser fitted as standard. The Davenport also has a seat, which flips up out of the way when not in use, giving you more space to move.
CLICK TO VIEW A LARGER IMAGE
 |
Size: 800mm x 800mm x 2190mm
Price £999.99
Delivery: £99.99 (see exceptions)
- Remote Control
- Electronic steam time &
temperature control
- Thermostatic Shower Valve
- 15cm Tropical Monsoon Top Shower
- 6 Hydro massage body jets
- Multi function hand shower
- Foot massage attachment
- Built-in FM radio with cd/mp3 input
- Extractor Fan
- Toiletries Shelf
- Low voltage ceiling lighting
- LED back lighting
- Built in flip up seat
- Ozone Sterilization (o3)
- 3kw Steam generator
|
| |
Learn about the benefits of Hydrotherapy |
 |
 |
 |
 |
 |
 |
 |
| Click to view larger product feature images. |
Large steam rooms allow the occupant to sit or stand at a comfortable distance from the steam outlet whilst enjoying the steam facilities. In order to offer the same steam facilities but within a smaller shower cabin footprint the location of the steam outlet pod may be close to the occupant. Care must be taken when using the steam function to avoid scalding. Children should NOT use the steam within the product unless under strict adult supervision.
Package sizes:
Carton 1: 1980mm x 900mm x 340mm
Carton 2: 840mm x 270mm x 840mm
Carton 3: 1980mm x 130mm x 550mm
Carton 4:1920mm x 300mm x 300mm
Measurements are a guide only.
Package dimensions may change without notification.
 |
Your Delivery:
Your order will be supplied on a Pallet and arrive on a Tail-lift lorry. The delivery will be taken to your door or as close as is possible within access restrictions (narrow gates etc). You are required to inform us of any access restrictions that may affect deliveries to your delivery location, which would require a smaller delivery vehicle. You are asked to check the goods upon arrival and inform us of any damage within 24 hours.
 |
Installation Notes:
Electrical: This steam shower cabin requires 1 x 13amp electrical supply. It comes with a plug and RCD fitted, however we recommend you remove the plug and have the cabin installed to a fused spur. If you have an RCD fitted within your mains board you may also remove the RCD fitted to the unit.
Water: The cabin requires 1 x hot and 1 x cold water supply. The household water pipes should be fed to a point approximately 1 metre off the floor in the corner where the cabin is to be fitted. Balanced water pressure is required, between 1-3 bar. If using a gravity fed system we recommend you use a pump, to provide the required water pressures. Bathtek do not supply pumps. The steam cabin is a freestanding unit and as such we would recommend your fitter does not fit the unit into locations that mean the cabin cannot be moved away from the wall if needed. The couplings on the cabin to connect to your water supply are standard 15mm compression fittings.
Some of our products arrive in large boxes, please ensure that you have enough room to manoeuvre the boxes and their contents to the installation location. Please also consider the space required to construct the shower cabin needs to be sufficient to enable you to move around the whole unit during its assembly, before sliding into position.
Please also read our helpful FAQ section.
|
