Whirlpool bath, whirlpool baths, spa bath, jaccuzi bath, underwater lights, lcd tv, bubble jets, whirlpool bubbles, whirlpool surf bath, whirlpools
 

Home PageBack to Whirlpool Baths

Bathtek C015 Whirlpool Bath with TV

The C015 whirlpool bath is a 1850mm x 1350mm round corner bath with Whirlpool jets, head rests, bath filler tap and multi jet hand shower with hose. The C015 is made from white acrylic. This whirlpool bath has a pop up waste underwater light and radio as standard.

CLICK TO VIEW A LARGER IMAGE
Bathtek C013 Whirlpool Bath
Learn about the benefits of Hydrotherapy


Size: 1850mm x 1850mm x 630mm

Price £1599.99

Delivery £129.99 (see exceptions)

AVAILABILITY: 6 WEEKS FROM ORDER


Click here to watch the short whirlpool video


  • Whirlpool System
  • LCD TV
  • 2 x Head rests
  • FM Radio
  • Underwater light
  • Multi function hand shower
  • Pop up waste and overflow
  • Built-in FM radio with cd/mp3 input
  • Bath filler tap

Remote Shower Head LCD TV Shower Head Whirlpool Jet Chromotherapy Underwater Light Control Panel
Click to view larger product feature images.


Colour changing underwater lights
Your Delivery:
Your order will be supplied on a Pallet and arrive on a Tail-lift lorry. The delivery will be taken to your door or as close as is possible within access restrictions (narrow gates etc). You are required to inform us of any access restrictions that may affect deliveries to your delivery location, which would require a smaller delivery vehicle.
You are asked to check the good upon arrival and inform us of any damage within 24 hours.

Buying Guide - Click Here

Installation Notes:
Electrical: This Whirplool bath requires 2 x 13amp electrical supplies. It comes with a plug and RCD fitted, however we recommend you remove the plug and have the cabin installed to a fused spur. If you have an RCD fitted within your mains board you may also remove the RCD fitted to the unit.
Water: The cabin requires 1 x hot and 1 x cold water supply. Balanced water pressure is required, between 1-3 bar. If using a gravity fed system we recommend you use a pump, to provide the required water pressures. Bathtek do not supply pumps. The couplings on the cabin to connect to your water supply are standard 15mm compression fittings.
This product arrives in a large boxed crate, please ensure that you have enough room to manoeuvre the box and its contents to the installation location.

Please also read our helpful FAQ section.


top of page

 

Bathtek Franchise Opportunities

Download Brochure

Nationwide Fitting Service available

Click here to view the Bathtek Product Video

 
COPYRIGHT BATHTEK 2010      Terms and Conditions      Site Map             Product design and features are subject to change without notification.